[DML] Re: Mounting rear bezel (license plate holder)...

["formula969" <formula969@xxxxxxxxx>]

I didn't realize that was how you would get behind the license plate... thanks for that!  I'll be more ambitious the next time I visit this problem.
-Ryan

--- In dmcnews@xxxxxxxxxxxxxxx, "daveswingle2" <swingle_dmc@...> wrote:
>
> As someone else mentioned you can remove the tail lights and reach in behind the plate and just use conventional nylock nuts, but then you'd have to take the tail lights out to change the plate.
> 
> Since most states are using "permanent" or 5-year plates now (i.e. you just put on new stickers) maybe that's a good measure of security and inducement to clean the tail light circuit boards once in a while. 
> 
> --- In dmcnews@xxxxxxxxxxxxxxx, "formula969" <formula969@> wrote:
> >
> > 
> > 
> > Thanks for the advice.  I took off the bezel, now noticing what must have been the original jack-nuts?  totally stripped.
> > I just tapped in part of a small plastic anchor and used some new screws...
> > Not the the most classy solution, but at least I won't worry about losing the plate now.
> > -Ryan
> > 
> >
>




------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/