[DML] Re: Headlight switch repairs

["David Teitelbaum" <jtrealty@xxxxxxxxxxxxx>]

Doing this repair is a short-term solution. Too much current for the switch causes it to get hot. Consider adding relays like John H offers or you can do it yourself if you are handy.
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxxxxxx, "dadoc2791" <gekko@...> wrote:
>
> Just a note for those who have had minor difficulties with their headlight switch.....
> My switch began getting 'flakey' where, when I punched for headlights it would sometimes not fire them up; so I had to punch it off, double punch again and sometimes it took 3-4 cycles to get the headlights to stay on.
> I remembered somebody talking on the list about repair/rebuild of switches that weren't entirely melted down and that it wasn't all that difficult to do, so I decided to attempt it.
> I turned off all power (I have a battery cut-out switch) and pulled the switch (of course, have to pull the instrument control panel off first to make it accessible) and took the switch to the bench.  It was easy enough to pop the innerds out of the housing using a small screwdriver and gently prying the sides out to release the retainer nubs.  Inside I found the neoprene around the copper slides was just slightly melted around them so I used a utility knife to trim off the strips of melted plastic.  Then I used my dremmel tool with a small stainless wire wheel to clean up the copper....ALL the copper, including the plug blades outside.  I gave the spring contacts a slight tweak to keep them firmly hugging the contact strips when they are engaged, put a drop of white grease on the switch locator rod and re-assembled the whole thing.  Total repair job took about 15 minutes.  Reinstalled and it works perfectly.  (Note: the switch mechanism only fits into the housing one way....be sure to notice that when disassembling!)
> Obviously, this is not the course for a badly melted switch or one that has other organic problems but for a periodically tempramental switch, it is easier than I figured and could save some folks the $50+ for a new one, at least for a while.
> 
> Good luck and Drive Stainless!
> 
> Craig Werner
> 07181
>




------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/