Re: [DML] Re: COMPUTER GOV.

[Jeff Angwin <jangwin@xxxxxxxxx>]

I can confirm that the output of the speed transducer that is bolted to the
side of the transmission does indeed come up the loom to the multi plug. And
Martin is correct in stating that it does not break out in any way. The
wires are the two white wires that are inside the middle cable that exits
out the bottom of the AT connector block. They are referenced against the
black ground wire in that same cable. One of the white wires goes to the
speed transducer, and one goes to the throttle position sensor. I have no
idea why these signals are routed to the block, as they are also routed
through the AT governor board down inside the speed transducer housing, but
fortunately for me, they do route up to the block. I use these wires to get
the speed and throttle position signals to my engine compartment mounted
plug-and-play governor replacement box

---Jeff---
VIN 3034



Jeff Angwin



On Thu, Apr 23, 2009 at 3:14 PM, Martin Gutkowski <martin@xxxxxxxxxxxxxx>wrote:

>
>
>  From my recollection of my friend Rich J working on his #2727, the o/p
> from the little alternator comes up the loom to the multi-plug, but
> doesn't actually break out in the plug, then loops back down to the
> transmission - can you confirm?
>
> #2727 has long since been a 5-speed :-)
>
> Martin
>
>
> > My first unit did have a new cable wired into the empty governor housing,
> > just to get the speed transducer signals out to the engine compartment.
>
>  
>


[Non-text portions of this message have been removed]



------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/