Any Advice My car starts cold but only when a little gas applied, and idles to low 800 RPMs When it is warm, however it is very hard to start and must apply gas to get it going or will not start at all. Once it is warm it seems to be fine around 1100 RPM I would like to have it set around 950 RPM that's what it was before and It was perfect. Could it be the idle reg. warm up reg. or fuel accumulator? CO2 setting tried to adjust. Removed and replaced the intake manifold with new gaskets everything appears tight no leaks and vac. lines are routed the right way. The micro switch is being tripped and the vac. solenoid clicks when it is suppose to. Any thoughts or anyone ever experience this? [Non-text portions of this message have been removed] ------------------------------------ To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/