More likely the door was slammed because it is out-of-adjustment. That bends the linkage inside the door eventually causing it to not be able to fully release either or both of the latches. The "fix" is to remove the interior trim while the door is shut (not easy) reaching in and pulling on the links to unlock and then release the latches. Both latches MUST be in the "second locking position" before trying to lock the door. If you force the door to lock you WILL jam the door. Once you get the door open you have to adjust the latching pins and go through the whole adjustment procedure as per the Workshop Manual. Be careful of all of the sharp edges inside the door, it will cut you up! David Teitelbaum vin 10757 --- In dmcnews@xxxxxxxxxxxxxxx, "welmoedj" <joe.dalton@...> wrote: > > --- In dmcnews@xxxxxxxxxxxxxxx, "skyang0011" <skyang0011@> wrote: > > > > it seems that the rear latch on the drivers door releases but the > front > > will not release. > > Probably the guide of the front lock rod that came off of the door's > inner side. Happens often. Take of the upper door panel and look for a > plastic clip (guide) about at the grab handle's position. You may also > have to take the lower door panel off to have a clear view. > > Welmoed. > ------------------------------------ To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/