[DML] NEW STARTING PROBLEM

["rmclemns" <rmclemns@xxxxxxxxx>]

As most of you know, I was able to get Josh's Beast out for a 5-6 
mile spin on Sunday.  It ran decent, except for the bogging at about 
2500 rpm.  After I got back, I let it idle for about 1-2 minutes 
before I shut it down so I could check everything.

After it cooled off, I rechecked all the systems to make sure 
nothing was coming loose or falling off.  Everything checked 4.0.

This morning I went to start it and it would not start.  Cranks like 
a champ, but will not even attempt to fire.  I noticed I could not 
hear the fuel pump running or smell even a hint of fuel fumes in the 
engine compartment.  So, I pulled off the RPM relay, jumpered 30 & 
87, and the pump ran like a champ.  Put the RPM relay back in and 
cranked, no fuel pump running.  I swapped the old relay out for a 
brand new one, same results, no pump.  I checked my connection from 
the coil (white/slate) and it is still tight.  I checked all the 
connections to the ballast resistor, they are all tight.  Main fuel 
relay checks 4.0 on the bench.

I know the problem has to be something electrical, in the starting 
circuit, that came loose on the bumpy 1.5 mile county dirt road that 
I live on, but this one has me scratching my head.  Any ideas, 
thoughts, guesses, ????????

Mike   TPS   1630


------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/