[DML] Question: Hole in fiberglass that allows water leak in ECU area

["Justin Mettee" <jamettee@xxxxxxxxx>]

When I got my D back in April, someone told me "you have an early 
VIN, you probably have a hole that leaks into the ECU area".  Well, I 
now have both interior side panels off because I'm replacing the rear 
speakers.  Both sides have a hole about a 2.5" diameter, right behind 
the speaker magnet.  I can look through the fiberglass & see tha 
inside of the rear quarter panel.

I assume these are the cabin vents to allow the doors to close & the 
vent system to work.  Are these the holes I should be looking for?  
Is there another hole that is common on early models & should be 
plugged to prevent leaks?

I just want to get a good answer before I put the side panels back on.

FYI, I have VIN 2075, June 81 build.

Thanks
Justin


------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/