Did you bench bleed the new MC? you may still have air in the system. Harold McElraft - 3354 --- In dmcnews@xxxxxxxxxxxxxxx, Bob Brandys <BobB@...> wrote: > > After recently replacing the leaking master cylinder on the 2015 De > Lorean, > I put in DOT 5 and bleed the whole system to wash out the DOT 3. > > The car has been up on jack stands while we continue its conversion, > but the brake fluid level > has been continually dropping. I have added about 3 oz. to the MC. > > The strange thing is I can not find any leak. No puddles. No drips. > All the wheel cylinders are dry. The MC is dry. > No brake fluid leaking onto the drivers floor (this has no carpet right > now.) > This has been going on for over a month. Where is the brake fluid > going? Does DOT 5 evaporate? > > Bob > ------------------------------------ To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/