I'm not much of a welder myself (MIG sorta, stick pitifully), so I built my exhaust system from boltable components. Pics are in #5939's Yahoo photo album. Everything (including guillotine clamps) is stainless steel except for the mufflers themselves -- couldn't find stainless ones small enough. It isn't a true performance system, but compared to Dunmurry's efforts it is a 100% improvement. Cost was quite low (about $125). Bill Robertson #5939 >--- In dmcnews@xxxxxxxxxxxxxxx, "John Rydholm" <ebondefender@...> wrote: > > I guess my big problem is I lack the mechanical tools somewhat more > than skills. I really ought to invest in a good arc welder, maybe take > some fabrication classes. I could probably save on the exhaust if I > knew how to do that myself. > To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/