It is possible you have a cable length issue. When you hook the drill up, the plastic cap was not on.. Was the angle drive installed in the hub? or just hanging loose? Maybe your angle drive is mounted slightly closer (tighter) to the hub, making the cable stick out the other end too far. You could try making a spacer to put between the angle drive and hub. --- Videobob Moseley <videobob@xxxxxxxxxxx> wrote: > > Elvis, I know it seems that way. > However, the last few to break failed right out of > the driveway. > Zero miles. > I installed a new angle drive, backed out of the > driveway, and it broke. > > I explained that I used a high speed drill and > attached it to the lower cable and ran it > at full speed in both directions and it worked fine > and smooth with no kinks or snags. > It ran smoothly without any resistance. > > The angle drive however was locked up and would not > spin. > > So you tell me dude, what could the problem be? > - VB > ____________________________________________________________________________________ Get easy, one-click access to your favorites. Make Yahoo! your homepage. http://www.yahoo.com/r/hs To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/