New rubber for the tie rods ends and the ball joints are on my web site. John Hervey www.specialtauto.com www.deloreanautoparts.com -----Original Message----- From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of delorean_pilot Sent: Saturday, October 20, 2007 6:44 AM To: dmcnews@xxxxxxxxxxxxxxx Subject: [DML] Tie rod enf seaks - they are gone! Hellow all. While visiting the shop doing my brakes I noticed the cup-like seal on each tire rod end was mushy and torn. Are the seals available? On another note, will POR-15 work on surface rust oe is it better to apply the original rubber-like epoxy coating? To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/