[DML] Re: AC mode switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: AC mode switch



Hi, I'd be willing to bet that what's actually up is that the
diaphragm in the mode switch is either in backwards or the rubber nubs
molded into the diaphragm itself are worn or broke, so that it is not
in the correct position to direct vacuum to the correct vacuum line
depending on the position of the switch. I would advise disassembling
it to check. It's not terribly difficult.


--- In dmcnews@xxxxxxxxxxxxxxx, "joopnoordzij" <noordzy@...> wrote:
>
> Hi all,
> 
> I have always felt that the AC in my Lori did not work like it 
> should. There was not much wind coming out of the central vents. I 
> finally took some time to look into it, although with the current 
> weather in Europe there is no real need for AC. With the blower at 
> max (4), near to nothing comes out of the two central vents above the 
> radio, unless the AC mode switch is set to defrost: then there is 
> some real output. he windshieldvents stop venting at defrost. 
> According to the manual, the central vents should nearly always vent, 
> but the windshieldvents only at defrost.
> So it appears that the PO switched the no 4 and 5 vacuum connectors 
> at the mode switch. How can I test this assumption without having to 
> remove all of the center console? Can I just switch the other end of 
> the vacuum lines? But which actuator does what, i.e. which need to be 
> switched? I appreciate anyone having been down there before giving me 
> some advice.
> 
> Thanks,
> 
> Joop Noordzij, VIN 3085
>




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated