[DML] Re: stalling
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: stalling



If we can assume you replaced these parts with the correct ones and
did it correctly then it would seem to be an adjustment is neccesary.
Did you adjust the mixture screw? Is the throttle linkage and the
micro switch adjusted correctly? What was the origional problem you
were trying to fix by replacing everything?
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxxxxxx, "mydmc5898" <mydmc5898@...> wrote:
>
> I recnetly as of January replaced my fuel distrubtor, injectors 
> etc... well anyway, everything on my car has been updated, replaced 
> with the fuel, cooling, transmissions, pretty much everything in 
> those, also tune up, new wiring all that fun stuff. 
> 
> Well now when I start up the car it struggles, it will start but it 
> takes about two times to turn over. If I rev the engine, I get clouds 
> of black smoke. After the car idles it runs fine, as long as i keep 
> it stationary or a constant speed like the highway. But now when I 
> come to a complete stop and only when I push the clutch in the car 
> stalls. If I rev the engine it will keep running, even when it comes 
> to a stop I can then let it idle, but not reving the engine the car 
> almost stalls instanly. the idle just crashes....
> 
> Any ideas what it can be. I'm going on a two hour trip and need the 
> car next week.... ayway I could do some testing to see what it is?
> 
> -thanks
> 
> Darryl
> VIN 5898
>




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated