--- In dmcnews@xxxxxxxxxxxxxxx, "Rick" <rdevaux@...> wrote: > > Did anyone happen to get the specs for the camshafts that DMCH are > using in their upgrade? Any info on the header specs? > That's their trade secret. They spent the money to have it developed so they aren't going to givit out for free. If you want that kind of info, you'll have to plunk down the cash and buy the setup then take it apart too reverse engineer it. If you want cams, you can buy them from DMC California @ $600 a set or DMCL in the UK.@ $800 per set. Then Buy DMCH Stage I package. It will get you about 185 Flywheel HP. Remember when buy a stage II set up you are buying a pair of brand new heads that have been ported. If I recall each stock head is priced over $1000 before the porting and extra machining. You only get maybe 15 hp for $2400 extra dollars. Dennis To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/