[DML] Fan Speed Overload

["dadoc2791" <gekko@xxxxxxxx>]

I have replaced all fuses and relays at the fuse block with new ones.  
I have replaced my fan motor and speed control resistor array.  The fan 
works great at all speeds, in all modes.  The one issue I'm finding is 
that when I run the fan on high (#4), after about 5 minutes, it shuts 
off.  It remains off for about 3 minutes and comes back on again.  It 
will then run for about 5 minutes and quit again.  It seems as though 
there's an overload breaker that cuts it out and when it cools, fires 
back up again.  It only does it on high speed.  On any lower speed it 
will run continuously all day.

Ideas?

Craig Werner
07181



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/