I am truly sorry for the smart-ass response, but I thought they might connect to the pre-warmer for the flux-capacitor. --- jedimasterglenn <jedimasterglenn@xxxxxxxxxxx> wrote: > In taking apart my air induction system, I unplugged > a wire connector > & can't figure out for the life of me where it > connects to. The > connector has two wires running into it. One wire > is black and the > other is light green with a dark green (or > aqua-like) stripe. The > opposite side of the connector has 1 male and 1 > female end. It > obviously clips to something & I'm guessing it's in > the vicinity of > the inlet manifolds. Below are a couple pictures of > the wires that > I've put on my wife's website. > > http://www.historicallydressed.com/glenn/Wires1.jpg > http://www.historicallydressed.com/glenn/Wires2.jpg > > Thanks, > Glenn > 5391 > > > > To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/