Marc, I have sold 100's of units of my new slim line unit that reads correct as long as you are running the correct oil and never had a return or a problem. $36.95. John Hervey www.deloreanautoparts.com -----Original Message----- From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of Marc Levy Sent: Monday, April 30, 2007 8:24 AM To: dmcnews@xxxxxxxxxxxxxxx Subject: Re: [DML] Oil pressure sender - always says 80 psi I have yet to find a reliable sender. Some read very low, some read very high, and some pin the needle straight up (beyond 80 PSI). They will work fine for the first few drives after it has been replaced, but within a month (my experience has been that) they all fail. Granted, I have not gone through the list of DeLorean vendors to try the part from each of them because I assume they are all using the same GM cross-ref part. --- sweetp01569 <paul.sweet@xxxxxxxxxxxx> wrote: > Question about oil pressure sender. My oil pressure > gauge always > reads just under 80 psi the instant I start the car. > Is this correct? > Just want to make sure, as I hear there are possible > issues with > incorrect senders that display the wrong pressure. > > Thanks, > > Paul To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/