Pull both of the wires that clip onto the connectors on the Otterstadt switch. If the fans stop replace the switch. If they still run you have a wiring problem. When replacing the switch always replace the seal. NEVER use any type of sealer or silicone on the seal. Make sure there is a clip on the switch and you can also use a strap-tie. The Otterstadt swich is in the short pipe down on the left side of the motor. You can see it easily from underneath with the 2 wires going to it. David Teitelbaum vin 10757 --- In dmcnews@xxxxxxxxxxxxxxx, Marv Williams <marv2020@...> wrote: > > Checking the otterstadt now, fans are coming on with AC/Heat turned off. > > > To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/