Re: [DML] Re: Angle Drive Installation (Strange Things)

[Marv Williams <marv2020@xxxxxxxxx>]

Thanks, I returned my 15inch breaker bar to Sears , and got a 24" breaker bar from Autozone, It worked, Then I spent more time trying to get that snap ring out then I did on any part  or the project. I recommend using 3" nails to grab the holes of the snap rings, finally worked. Thanks Again.

Piszar <piszar@xxxxxxxxxxxxx> wrote:           Ah yes, leverage. I also experienced the issue of not being able to 
get the proper leverage to loosen the nut when I replaced my angle 
drive. I ended up using a hydraulic jack under the wrench handle, 
it worked perfectly. Give it a try.

Sandor
# 3002

--- In dmcnews@xxxxxxxxxxxxxxx, "marv2020" <marv2020@...> wrote:
>
> Team,
> Need help, bought the new Angle Drive kit from DMC to fix my 
> speedometer, I even read the instructions (multiple times). But 
some 
> strange things are occuring. 1.) The instrictions say you need a 
32mm 
> socket, Mine's need's a 36mm. Is this a typo or was mine changed 
> sometime in the past? Ok, I got it lose, using a 36, but the back 
nut 
> (1 1/4) will not budge and I'm nut sure which way to apply force, 
up 
> or down, i.e up-being counterclockwise, looking at it from the 
> driver's side or down-being clockwise -looking at it from the 
driver's 
> side. There's very little room under the there to get the 
leverage, 
> any suggestions or tools to get the leverage I need in this tight 
> spot? 
> Thanks in Advance.
>



         

 
---------------------------------
Check out the all-new Yahoo! Mail beta - Fire up a more powerful email and get things done faster.

[Non-text portions of this message have been removed]




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/