I'm replacing all the coolant hoses in my DeLorean and have run into a little "snag." When replacing the driver side coolant hose running to the water pump, I noticed it was a much tighter fit than the one the previous owner had installed. In fact, the fit is so tight There's the beginning of a kink to it. When I compared the hose to the one the previous owner had installed I noticed that he had cut a small portion of hose out of the U-shaped section and used a coupler to make a better fit. My question is, is this hose supposed to fit tightly? Am I not positioning it correctly? Is there something wrong with the hose? Thanks. -Kevin VIN 2234 ____________________________________________________________________________________ Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail beta. http://new.mail.yahoo.com To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/