I am looking to replace my old horns and my horn switch as I believe it is melted in the turn signal stalk. I have power going up to it but only sometimes have power at the switch end. Before I install a new horn switch, I want to make sure the new horns are installed and wired up with a relay to prevent this from happening again. I am not all too familar with wiring a relay, could anybody who has done this walk me through where I need to splice it in and what needs to be connected where? Thanks, -Derek #10084 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/