[DML] A/C air volume / Blower motor
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] A/C air volume / Blower motor



The trip to and from DCS2006 has convinced me that I need to do
something about my AC.  The temperature was fine, very cold right at
the ducts but there was not much power.  I believe I have confirmed
that the squirrel cage is proper and the motor is turning properly, ie
counter clock wise.  The is no obstruction visible on the fan side of
the evaporator.  I do notice something odd in that when the holes in
the motor mount lines up with the plastic pin in the housing, the
opening for the rubber tube is about 180 degrees out.  I don't know if
this means the motor is indeed the wrong one or if its mounting plate
somehow got turned.

Any ideas?

(Yes, yes I do plan to add new center vents which I removed when I
installed my computer.)

Thanks,

Dave Delman
 aka D� & 6530
(Still driving with a 2700 ohm resistor in series with my ignition
pickup coil and now clue as to why it doesn't run right without it...)









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated