Re: [DML] Vacuum actuator cross ref? (was Question about a/c and hot water valve)

["at88mph" <at88mph@xxxxxxxxxxx>]

Sorry, I made a mistake on that part.  Its actually pn 101752.   I've been looking at this 
stuff so long, its kind of blended together! :)  I superguled the one I have back together however.

Basically, what I've done so far is: (system is R12):

1. Replaced the compressor/accumulator/orifice tube from DMC Houston
2. Checked that the fan blower motor and also the cooling fans are running ok and in the right direction
3.  Put gauges on the high/low side and they are reading correctly per the manual
4.  Made sure the right amount of freon is in the system w/ no leaks
5.  The compressor is cycling like it should.  

The only things I haven't replaced are the hoses (don't think they're an issue b/c of no leaks) the condenser and the evaporator core.
The best I can get it down to is 59 degrees running down the road.  Taking all this into consideration, which part would be the better to buy first? 
Now, the a/c shop did say I had a lot of oil in the system, but they flushed most of it out.  They said, in their opinion, the next step would
be to remove the evaporator core and see what it looks like (see if there is any oil left in it and let it drain out)

Thanks again to all of you for your help!

Duke





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/