Re: [DML] AC Compressor update

[Chris Shepherd <chrisau79@xxxxxxxxx>]

Sounds good..........Did you replace both shrader valves or just the low side. The kit I got doesn't have a high side valve that will work. It's a reverse thread.
   
  Chris
  06301

Dave Phelps <dphelps17@xxxxxxxxx> wrote:
          I charged my car up with Freeze 12 last week. I could not be happier. I
drove 512 miles over the weekend with the air on the whole time with
absolutely no problems. It seems to be blowing just as cold as my R12 did.
The whole kit is only about $50 on ebay. You will have to remove the old
shrader valves and install the Freeze 12 fittings on your compressor. Takes
about 2 minutes. I say go for it.

Dave
6286

On 6/9/06, Chris <chrisau79@xxxxxxxxx> wrote:

Thanks to all who responded, especially Tom and Wyatt.
>
> The problem is that the charge is low. Jumping the low pressure switch
> resulted in the compressor clutch coming on and everything running as
> it should with a proper charge. I now have several more clean
> electrical connections that have been coated with dielectric grease.
>
> Now to take the AC test so I can buy some R12! No, I'm not going to
> convert it. There is still pressure in the system, just not enough.
> When I depressed the shrader valve on the low pressure side there was
> a definate pfffist (the engine was off). Has anyone tried adding
> Freeze 12? What I read indicates that it will work.........but?
>
> Chris
> 06301
>
> 
>

[Non-text portions of this message have been removed]



         

 __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

[Non-text portions of this message have been removed]





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/