When I installed the Wings-a-Loft system I had a simialr problem with door locking. The linkage appeared to be adjusted right but the rear latch on the drivers door seemed to be significantly stiffer then the rest and required a really good pull to unlatch. After spending a lot of time playing with the latches and linkage, even to the point that I rewound the driver's side solenoid, I decided to go into the door lock module and replace the relays. Everything worked fine after that. I didn't do a "scientific investigation" but off hand I'm guessing the solenoid wasn't getting a strong enough pulse to activate the stiff latch in the unlock mode. In any event as soon as Toby at DPNW posted something regarding his digital module last winter I bought one and everything works great. Note that this won't cure mis-adjusted linkages but something to consider if all else is ok Bruce Benson > Got a new problem with my door locks. Drivers side will lock both > doors, but will only unlock the driver's side. It doesn't engage the > solenoid, it only moves the actual mechanical part when using either > the inside lock or the key. I haven't taken the door apart yet, but > could there be a wire loose? Will the solenoid work one way and not > the other? > I think everything in there is still original. Thanks in advance for > your help, > > John Poland > 05935 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/