I still think that the modification I designed is a very good one. I didn't mention it because the vendor kits I mentioned do a good job of separation and strengthening of the system and I'm sure most folks would just hook up something out of a box that works. The DPNW kit, although I haven't seen it, appears to be the essence of the modification I mentioned in the article you refer to. Harold McElraft - 3354 --- In dmcnews@xxxxxxxxxxxxxxx, <delornut@...> wrote: > > Harold, > > There's a cooling fan wiring modification that you co-authored in the tech > section at the DMC News web site. You didn't mention it in your post below > but it's simple to do and allows the fans to run continuously while in the > AC mode rather than cycle continuously with the compressor. I've been > running my car with this mod for many miles with no problems. ( I am using > Bosch fan motors in place of the originals ) The fact you didn't mention it > here has me wondering if you've had a change of mind regarding this. The > amperage draw each time the fan motors start makes doing this modification > appear to be a must do mod and as I mentioned , after several thousand miles > I have yet to notice any ill effects. > > Bruce Benson To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/