It is common that the wire is unplugged at the connection by the top of the left head (driver side) just above the distributor cap. You can connect the dwell meter there too rather than the diagnostic plug. Check the wire diagram for colors - you will see it. Harold McElraft - 3354 --- In dmcnews@xxxxxxxxxxxxxxx, Ryan Wright <ryanpwright@...> wrote: > > Where does the CO adjustment wire (top right corner pin on the > diagnostic connector) go to? I can't get any signal whatsoever out of > it, so I want to track the wire down and make sure it isn't broken > anywhere. > > -Ryan > To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/