Hi Bernie I've got stuck like this a couple of times, and the best solution is either to be on a 2-post ramp and use a very long breaker bar to turn them, and copious amounts of penetrant, or cut them off, remove the trailing arm and press the old bolt out. Martin Bernie wrote: >All, > >I too am in the process of replace my TABs with Toby's but my tabs are >so corroeded I can't even turn the bolts. Today I managed to at least >get the passenger side shims to move (thats a good thing), I am using > a new penetrating oil called Gibbs, expensive as all get out but it >works. $32 for two cans. I will give a full review once I get this >project completed. > >One 5lb hammer and a stratigaclly placed punch/chisel should take care >of the problem without resosrting to the torch. > >Bernie > To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/