Re: [DML] Failed emmissions AGAIN

["dmcchaser" <dmcchaser@xxxxxxxx>]

Find a shop that is emission certified.  Any shop that is set up to
repair and certify emission repairs will have the equipment.  Ask them
to do an exhaust gas analysis for you.

Matt Smith

--- In dmcnews@xxxxxxxxxxxxxxx, "valleyrat12" <valleyrat12@xxxx> wrote:
>
> Sorry for my ignorance, where could I get a pre test done?
> Nathan
> --- In dmcnews@xxxxxxxxxxxxxxx, "Darkstar" <darkstarmedia@xxxx> 
> wrote:
> >
> > let us know the results after that is done.. I would suggest doing 
> a
> > pre-test first.
> > 
> > DarkStar
> > 
> > -----Original Message-----
> > From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx]On 
> Behalf
> > Of valleyrat12
> > Sent: Tuesday, December 13, 2005 7:50 PM
> > To: dmcnews@xxxxxxxxxxxxxxx
> > Subject: Re: [DML] Failed emmissions AGAIN
> > 
> > 
> > I know the mixture and timing are correct because I allready took
> > the car to Garden Grove.  There must be something else wrong
> > with the car and I can not afford the $800 or so dollars in labor 
> it
> > would cost to have a proper mechanic do it.  Plus I bought the
> > car as a hobby, I enjoy pain I guess...
> > 
> > I will be replacing:
> > 
> > Cap and rotor
> > Plugs/wires
> > O2 sensor
> > Cat
> > Oil Change
> > Adjust my noisy valve on the left side of the motor.  (Dolorean
> > Motor Center confirmed that it is indeed a valve and not the
> > exhaust gasket)
> > 
> > Any other ideas?
> > 
> > Nathan
> >
>








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/