Well, the fact that you have blown a 25 amp fuse should throw a red flag. I would carefully check the light modules for any areas that might be touching or shorting out. There might also be a short at the switch itself. The light itself is a fuse, so if something within the light path were to short the light bulb itself would blow. So you must have a ground short somewhere along the path. You need to trace the to's and from's with a continuity tester to find the problem. - VB >From: "geoff_ombao" <geoff_ombao@xxxxxxxxx> >Reply-To: dmcnews@xxxxxxxxxxxxxxx >To: dmcnews@xxxxxxxxxxxxxxx >Subject: [DML] Fuse Question >Date: Tue, 01 Nov 2005 21:52:52 -0000 > >Greetings! Today I found the fuse for my interior lights had blown. The >manual calls for a >10 amp replacement, but a 25 amp fuse is currently installed. Does anyone >know which >one is correct? (My bet is on the 10 amp one, but wanted to see if anyone >had any >insights.) > >Thanks in advanced. > >- Geoff > > > > > > > > >To address comments privately to the moderating team, please address: >moderators@xxxxxxxxxxx > >For more info on the list, tech articles, cars for sale see www.dmcnews.com > >To search the archives or view files, log in at >http://groups.yahoo.com/group/dmcnews >Yahoo! Groups Links > > > > > > To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/