Nick, I've seen this problem before and you're right that it's not good. Trimming the end slightly on a bench grinder is the safest way but you could probably do it on the car with a muffler cutter or other grinder if you're very careful. Rob Grady, P.J.Grady Inc. -----Original Message----- From: Nick Kemp Subject: RE: [DML] Angle Drive Cable Length .... too long? The cable I'm referring to is the cable through the axle that is part of the angle drive. I noticed that when I put the plastic hub on all the way that it was moving the angle drive on the other end. To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/