[DML] Re: Turn Signal/Clock
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Turn Signal/Clock



When I check bulbs I remove it and "flick" it with a finger. Watch the
filiments. If one end wiggles around it can make contact and work for
a while. Hard to describe, easy to demonstrate. Annoying when it
happens and gives you intermittant problems. Testing IS important
though. Very hard to visually inspect electrical equipment.
David Teitelbaum
vin 10757




--- In dmcnews@xxxxxxxxxxxxxxx, "Toby Peterson" <tobyp@xxxx> wrote:
> Hi Gang - Relative to this thread on turn signal light behavior, I 
> just had an interesting situation with Winged1.  I started getting 
> the "fast flash" on the right hand turn indicator, which suggested 
> that one of the bulbs had gone bad, or one of the sockets had 
> 






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated