Here is a quick tip for the cooling fan fail light...If you have a jumper or fan relay fix that causes the Cooling Fan Fail light to operate during the fan operation as I have, you may want to modify the AC panel so that it just says COOLING during the fan's operation. Some have placed tape over the words Fan Fail. I was not happy seeing the tape on the front of the panel, so here's what I did... Remove the panel. With a sharp Exacto knife or a single edged razor blade (as I used) carefully, gently, cut between the laminate overlay and the plastic back plate. You are creating a pocket under the words Fan Fail. Take two 1 inch pieces of electrical tape and stick them back to back. Now cut this down to fit in the pocket you made in the laminate. Hold it to the light and adjust as necessary until you have covered up the FAN FAIL words. Trim or fold down the excess tape and put a small dab of glue on the bottom edge to hold it in place. Reinstall in the console and rejoice every time the word COOLING lights up! Marty Galbreath #3765 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/