Hello I've made one myself out of a plate of stainless steel. It's bend 3 times (first flat, then diagonal and then vertical) and I used the existing holes from the lower front grill to hang it on. That way it comes out just in front of the bumpers and I didn't have to dril any holes in the bumper. Extra advantage : when I park too close to a wall, this is the first thing getting hit ... Since pictures say more than words ... http://www.dmc-delorean.com/apow05/dmc07.jpg http://www.dmc-delorean.com/apow05/dmc10.jpg Regards from Belgium Andy Verbrugghe VIN#04610 geoff_ombao <geoff_ombao@xxxxxxxxx> wrote: Greetings. This weekend I was issued a 'fix it' ticket (fortunately, with no fine) for not having a front license plate, which apparently is required on all cars registered in California. Does anyone know if a front plate mounting bracket exists that does not require me to drill any holes into my facia? - Geoff #10718 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/