All of the studs on the spoiler can be drilled out, then you just use nuts and screws. For the grille drill out the old ones, get some screws of the right size and have someone weld them back in place. Dave Swingle --- In dmcnews@xxxxxxxxxxxxxxx, "Chris Hawes" <chris@xxxx> wrote: > I have looked in the archives and must be using the wrong keywords as I > could find no results even though I am sure this has been discussed > before.... > > I have taken my spoiler off as I need to remove the cowling/ducting that > fits between the spoiler and the radiator. The reason for this is that I > need to remove it so that I can undo the hose that connects to the lower end > of the condensor so that I can completely finish the aircon re- firbishment. > > As I was undoing the spoiler several of the threaded shafts sheered off as I > was undoing the rusty nuts. It looks like the thread was somehow bonded > into the plastic spoiler. The same thing happened with the grill. To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/