Thanks for the info. Martin. Lingo, #2034 ----- Original Message ----- From: "Martin Gutkowski" <martin@xxxxxxxxxxxxxx> To: <dmcnews@xxxxxxxxxxxxxxx> Sent: Tuesday, July 26, 2005 6:35 PM Subject: Re: [DML] Rebuilding the PRV > Here ya go (from my Renault manual) > > http://www.delorean.co.uk/rings.jpg > > In this table, the 2849cc engine is a Z7W - and it has 91mm ID liners > > For those curious about turbo PRVs, the Z7U is a Renault 25 Turbo, and > the Z7W (at the time of publication) was the Alpine A610 - note > increased ring size and tougher gudgeon pin on the Z7X > > Martin > > > Robert Lingo wrote: > >>One more thing; what size piston rings does the PRV call for? Can I >>purchase them from a local parts store, i.e. AutoZone, NAPA, etc. etc? >>I've >>searched the archives and came up empty. >> >>Thanks yall, >>Lingo, #2034 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/