[DML] Re: AC System oil
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: AC System oil



See message 53496 - I think you're on the right track.

Harold McElraft - 3354



--- In dmcnews@xxxxxxxxxxxxxxx, "Marty Galbreath" <marty@xxxx> wrote:
> It seems no one wants to take a crack at my oil question, so I did 
> some more research and learned a few things on my own.
> 
> My AC manual states that if a single part is being replaced, i.e. 
> evaporator, condensor or accumulator, then a certain amount of oil 
> should be placed in the new part. If everything is new, then all 
the 
> oil goes in the compressor.
> 
> Since I effectively have a cleaned out system now, I decided to 
> drain the compressor oil and see what was in there. I only had 
less 
> than 2 ounces in the compressor. I suspect there may be a lot in 
the 
> old accumulator, since it weighs 8 ounces more than the new one.
> 
> So, my plan is this: I am going to place 6 ounces of mineral oil 
in 
> the compressor, and pour another 2 ounces down the line going to 
the 
> condensor. That would put 8 ounces total in the system, which I 
> figure should be about right. After evacuation I will charge with 
36 
> ounces of R12. 
> 
> Am I right in this line of reasoning, or is there something I have 
> failed to consider? Any and all help welcomed.
> 
> Marty Galbreath
> 3765 - dash in pieces
> 
> 
> 
> 
> 
> 
> 
> --- In dmcnews@xxxxxxxxxxxxxxx, "Marty Galbreath" <marty@xxxx> 
wrote:
> > Hi Folks,
> > 
> > I am doing some extensive work on my air conditioning. I am 
> needing to 
> > know about the adding of regrigerant oil to a completely flushed 
> and 
> > cleaned out system.  I am staying with R12.
> > 
> > Assuming a system totally cleaned out, a new accumulator, new 
> orifice, 
> > new evaporator, all oil drained from the compressor, how much 
oil 
> is 
> > placed in the compressor opening and how much is pushed into the 
> rest 
> > of the system? I have read 6 ounces, but I am uncertain where it 
> goes.
> > 
> > Thanks in advance,
> > 
> > Marty
> > & vin 03765 aka mobile sauna






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated