Removing the pins out of the connectors is difficult unless you either have a tool or make one. The boot would have to come off also. I have the boots on the web site. John Hervey www.specialtauto.com -----Original Message----- From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx]On Behalf Of Wayne Wagner Sent: Wednesday, July 06, 2005 9:38 PM To: dmcnews@xxxxxxxxxxxxxxx Subject: [DML] Removing Electrical Contacts from connectors... Can anyone tell me how to pop out the electrical connector pins on the Idle Speed Regulator (the harness side). I was in the process of cleaning the electrical contacts and cannot get at the harness side connector contacts well enough. I am also in need of replacing the bootie for the connector. Anybody know where to get one? I didn't see a part pointed out in parts manual. Thanks. Regards, Wayne / VIN#2447 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/