Robert, It's difficult with a large wrench. An impact will normally do it but trying to get it in there is another problem. If all the belts are on, spray a small amount of brake fluid on them to help keep them from slipping and push down, then try the wrench again. John -----Original Message----- From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx]On Behalf Of Robert Lingo Sent: Sunday, June 26, 2005 9:29 PM To: dmcnews@xxxxxxxxxxxxxxx Subject: Re: [DML] Oops!!!! I was wondering if anyone would tell me the easiest way to get the nut off of the crackshaft pully. It just spins around and around when I try to loosen it. Also, do I turn it counterclockwise to loosen it? Thanks yall. To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/