Something is wrong with the connecting rods in the door of the lock and/or door handles. Probably the locking screws on the door lock rods have loosened up or they are dragging against the door lever rods. I have seem the mounting screws for one of the piviots come loose and give this symptom. Take off the top interior trim piece and observe the functions. I am guessing it will be obvious. Harold McElraft - 3354 --- In dmcnews@xxxxxxxxxxxxxxx, "Jerry Harry" <jlharry@xxxx> wrote: > Each time I try to open the drivers door the inside lock lever comes out of the open position and goes to about the middle of it's range and the door is effectively locked. I can hold the lock unlock lever in the open position and the door opens fine. If I do not hold it, it will move to the middle like position and the door is locked, it doesn't move until I lift either open lever, then it moves and locks the door. > Has anyone seen this, which adjustment is out to cause this? I have REMOVED the lock selinoid, it had no power any way but I found that it's plunger moved with the linkage and decide it was not needed, as it has been powerless forever. > This condition requires that I leave the drivers window down so I can reach in and hold down the lock unlock lever while I open the door. Sure would like to close that window. > > Thanks for any help. > Jerry > Vin# 4890 > > [Non-text portions of this message have been removed] To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/