--- Ryan Wright <ryanpwright@xxxxxxxxx> wrote: > I need some new bushings up front (full list below) > and am wondering > if any of our vendors have upgrades available? I can > certainly get > plain old stock rubber bushings, but I'm always on > the lookout for a > good upgrade (poly maybe?). > > -- Tie rod ends/bushings > -- Sway bar bushings (all of them) Ryan, Do you want new tie rod ends or bushings?There is no bushings on the tie rod ends.They go straight onto the steering knuckle and are held there by a castleated nut.While you're in there you may as well replace the bushings in your control arms if needed and inspect the lower control arms for rust or cracking.Last year my left lower control arm broke! Not sure if any vendors sell upgraded bushes for the suspension but I think stock bushes should be perfectly adequate. > Also, what are "ball joint rubber covers?" I wrote > down that I needed > them, but can't remember what they are or where they > go? These are the covers that go over the ball joints.They hold in the grease on the ball joint.I recently replaced the ball joints on my car and they came with the covers and a metal clip to hold them on as the boots had split on my old ball joints and the grease leaked out wrecking the joints. Cheers, Andrew 2883 Australia __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/