WOW this was a hard piece to take off, let alone drill the rivits. I did it and managed to take the rivit heads off, then to take the seal out, i had to bend and twist it out. How am i suspposed to put a new one on with the door on. THe old piece looks like a "Z" once it came off. I still have to take the rest of the rivits out too. David Teitelbaum <jtrealty@xxxxxxxxxxx> wrote:They are not special Delorean rivets. Any rivet of the correct size and length will do. Just be careful drilling out the old ones. You can cut a piece of tubing to slip over the drill so when you do drill through the rivet you do not go in too far and damage the S/S skin. I would also cover the torsion bar so you don't accidently scratch it. Another way is to use a small chisel and cut the head off the rivet. David Teitelbaum vin 10757 --- In dmcnews@xxxxxxxxxxxxxxx, stefan diklich wrote: > Do you have to order rivits from a parts dealer or can u pick them up anywhere? > > > To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com [Non-text portions of this message have been removed] To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/