I am trying to get to the window motor. I have window guide problems (that I think I fixed with the "sandwich washer" solution that was posted here - works well, but the "rails" they ride on seem too far forward. The window tracks nicely now, but about an inch too far forward, then pops the track trying to squeeze backwards into the right position!). When the motor assembly was replaced, the previous owner must have wired something backwards, because I have to push the arrow "up" button to make the window go down, and vice versa - opposite of how the switch works for the passenger window. I can get the top door panel off easily, but am a little nervous about the lower panel. What screws/fasteners do I remove on the lower half to get access to door actuator and window motor, guide rails, etc? Thanks, Paul --- In dmcnews@xxxxxxxxxxxxxxx, "byrondelorean" <celiambyron@xxxx> wrote: > My guess is that the window motor is bad. I read a post earlier that > mentioned a way to wake your motor up without removing the door panel. > Carefully remove the door light closest to the front of the door > without actually unplugging it. Get a flashlight and locate the motor. > Get a punch and hammer and give the motor a tap. Maybe have someone > hold the button in the up position as you tap the motor. It should not > take more than a few taps, so don't over do it. You will now it's a > motor issue if anything different happens in the window operation. > > Read more replies before attempting this. You will know this is good > advice if someone else can back me up. > I just replaced my passenger door window motor and regulator assembly. > It was a piece of cake. Door panels are good quality and come off > relatively easy. My regulator tape seized, I bought a NOS set up. > Works beautiful. Have whomever you buy the motor from, send you the > instructions. > > BC > > > --- In dmcnews@xxxxxxxxxxxxxxx, "coreysmoo" <coreysmoo@xxxx> wrote: > > When I put my driver's side window down, it does not come back up. > Then > > later on, sometimes weeks later, I will push the switch randomly and > it will go > > up. What causes this? It goes down every time. but it only seems > to come up > > when it wants to. To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/