4 hoses go to the vapor cannister. There is one from the center of the bottom. There is a small hose that goes to the underside of the mixture unit that tells the vapor cannister that the motor is running. There is a slightly larger hose that connects to the vapor line to the gas tank and there is the large vacuum hose that goes across the front of the motor and tee's into the vacuum line to the brake booster. It is the large one that is used to purge the cannister of vapors by the engine vacuum (when the engine is running as signaled by the little vac hose). It should be connected but if the cannister is not functioning properly and leaking vacuum then it should be fixed before reattaching. David Teitelbaum vin 10757 --- In dmcnews@xxxxxxxxxxxxxxx, "deepdmc" <deepdmc12@xxxx> wrote: > I just finished installing a new water pump, wow what a pain in the > rear end. It took me three full days. I ended up breaking two of the > intake manifold bolts, it took me two days just to remove them. I > tried using an easy out but broke the easy out so I had to drill 16579 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/