Ryan, That's awesome. Thanks for sharing that, as it's a modification I've been considering. -But I have a question about the way it works. Is this the way all cruise mods operate? It appears the module pulls the throttle spool clockwise, but is there anything to keep the cable from coming out of the spool? I just imagine the cable slipping out the way I've seen it happen after turning the throttle spool by hand from the engine compartment to rev the engine. -Or is that not a concern since the tension should already be on the cable before you set the cruise? Jake Kamphoefner 1063 -->Causing my right leg to be just a little sleepy after this weekend's 800 mile trip. ----- Original Message ----- From: "Ryan Wright" <ryanpwright@xxxxxxxxx> To: <dmcnews@xxxxxxxxxxxxxxx> Sent: Monday, May 02, 2005 3:42 PM Subject: [DML] Audiovox CCS-100 Cruise Control installation instructions > If you want cruise control in your DeLorean for under $100, check here: > http://www.ryanwright.com/delorean/ccs100/ > > The instructions are not 100% complete yet, but most of the > information along with some high res pictures & closeups is available. > Email me with any questions. > > -- > -Ryan > To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/