[DML] Re: Cruise control question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Cruise control question




 
 
Ryan,
 
The reading of the ohm meter has to be done with respect to what range it  is 
set at.  I doubt your meter is reading 0.489 ohms.  I'd guess it  may be 489 
ohms, which may actually be normal.  To confirm this you'll have  to check the 
specs with the manufacturer or compare with another coil.  Of  course you 
must make sure that you disconnect the coil from its circuit prior to  taking 
your reading as the circuit itself may affect the reading.
 
Keep us informed.
 
D² & 6530

Message:  22        
Date: Tue, 12 Apr 2005 23:53:04  -0700
From: Ryan Wright  <ryanpwright@xxxxxxxxx>
Subject: Re: Cruise control  question


Thanks for the reply, Ed! 

I think the coil is bad.  My ohm meter shows "1" for an open circuit
and "0.000" for closed. The coil  tested at "0.489", so I'm guessing
it's bad. Boy, I sure hope fixing it is  this easy. I'm going to take
it back to the store tomorrow and swap it for  another one.

The magnets are fine and I got the coil as close as I  dared. I
reviewed the directions several times, everything is  installed
properly as best as I can tell, although I'm still not sure if I  was
supposed to use just 1 magnet or 2. (1 for RWD, 2 for FWD is what  it
says. I used 2.)

Anyway, I greatly appreciate your reply. Without  it I would not have
known how to test the coil and wouldn't even have  thought it could be
bad. It's all brand new so one just assumes it should  be good. :)

-Ryan






Thank  you,

Dave



"Just Say  NO, to the COUCH POTATO!"®


To see how go to _www.tvpedaler.com_ (http://www.tvpedaler.com/)   



[Non-text portions of this message have been removed]






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated