Alright, this morning I was all ready to jack up the rear of the car to take the back wheels off. I put some small wedges behind the wheels to drive up on (the only drawback to the Eibach springs is that my jacks won't fit under the car when it's sitting on the ground -- otherwise they're great) and had the jacks ready to go, etc... So I sat in the car and was about to start the engine, and turned the key just to position 2, (and had it in neutral for the moment) and thought I'd give the parking brake release handle "one more try" before cranking the engine. .... ..... And it released all the way with ease!! I was astonshed, but most happily so. (After further inspection since my last post, I saw that the brake handle was stopping 2 clicks short of the bottom. Now it was all the way). Since it's raining today, I can't drive the car to make sure the squealing is gone, so I'm only celebrating an 80% victory at the moment. But I still feel very lucky that I seemingly got away with another "easy" fix. :) Thanks Andy for your response. -Derek L VIN 5302 --- In dmcnews@xxxxxxxxxxxxxxx, "lakelanier20" <derek4567@xxxx> wrote: > > > Wow, lots of brake discussion lately... > Well here's one about the parking brake. > > I had my car parked on an incline (ramps in my garage) for the past > 3 days. The front of the car sat about 12"-14" higher than the > rear. Naturally, I pulled the parking brake pretty tight and put > blocks behind the wheels. So today, when I drove the car off the > ramps, the "brake" light in the instrument cluster would not turn > off when I released the parking brake handle, and there is now a > loud squealing noise coming from the rear wheels whenever I turn the > car to the right. (It does not matter if this is forward or > reverse, if the front wheels are turned right and I drive, the > squealing is at its loudest). I tried pulling the brake tight > again and releasing it a few times, all to no avail. > > Could this be a problem in the parking brake handle? (confirmed by > the light not going off -- like the handle is not releasing > completely) Or, do I need to attempt some sort of adjustment > similar to what is described here: > http://lukesandel.com/auto/delorean/repair/parkingbrake.html > > Or something else altogether. Any help is greatly appreciated. > > Thanks, > -Derek L > VIN 5302 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/