Something is wrong with the sender. Harold McElraft - 3354 --- In dmcnews@xxxxxxxxxxxxxxx, "stainlessilusion" <5n-@xxxx> wrote: > > > I took out the harness that goes from the connector in the washer box > to the fans, horns fuel etc. and removed the wrap. Found that the > ground going from the main connector to the ground cluster was all > kinds of melted, must be another PO thing...Anyway I replaced the > whole wire and cleaned everything up, re-wrapped the wire and > reinstalled. NOW my situation....The fuel guage works finally BUT, > with the sender empty and float all the way down- the guage goes past > the 0 mark and stops at my pin; and the orange/yellow warning light > doesnt come on. When I turn the unit upside down so the float is all > the way at the top; the guage only reads a little over 3/4 a tank. I > have DMCH's senging unit, is this still wiring or could it be that the > unit is just defective? Thanks for all the past and future help! > -----Dani B. #5003 > > [moderator snip] To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/