Every Volvo I've ever seen has a double belt pulley -- are you sure you're not looking at pics of DeLorean PRV's with Darryl Tinnerstet's aluminum pulley? >From my measurements it appears a standard Volvo pulley will just barely clear if you remove the upper A/C idler pulley and run a slightly shorter belt (52" or so). My car came with only the lower pulley and I've been running it like that ever since no problem (upper pulley is bit of a kluge anyway compared to the integral lower one). Compressor is standard Sankyo/Sanden which people put on every vehicle imaginable, with every belt arrangement imaginable. Be sure you're running a DeLorean crankshaft pulley with the smaller outer groove -- standard Volvo pulley with equal diameter grooves will interfere even with Darryl's pulley. I'm running a Tinnerstet pulley BTW -- the only bling on my whole vehicle. Bill Robertson #5939 >--- In dmcnews@xxxxxxxxxxxxxxx, "jmlaux83" <jmlaux83@xxxx> wrote: > > > I have seen on some pictures I have found the Water pump pulley for > the Volvo 260 with only one groove for a belt. I have a pulley with > the two grooves for the two belts on my delo. Although I can still > run the AC belt with the second groove it damages the AC belt > slightly. Anyone know the part# of the other one or was it a special > made? I was just going to have my pulley machined but if I can pick > up the other one at any auto zone it would be better than going > through the effort of machining. > > Jason > 2256 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/