[DML] Re: Speedo Angle Drive Removal

["thebrave65" <ssawyer37@xxxxxxx>]

Mike, if you can't get the retaining ring out, there is one sure way
to get the nut off.  Fasten the nut into a bench vise, and take a
hammer to  the old angle drive.  I ended up having to do this becuase
the retaining ring in my AD was totally corroded and fused to the
inside of the nut.  There was no other way to get it out.

Johnny
5518


> 
> Hey gang,
> Can anyone help me with some information on removing the speedometer
angle drive?  I have removed the large nut holding the angle drive but
I cannot for the life of me figure out how to get the retaining ring
to release the angle drive from the nut.  Any thoughts as to how to
remove the retaining ring?
> This is turning out to be a tougher job than it looks,
> Mike
> #3760
> 
> [Non-text portions of this message have been removed]








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/